Nehbandan Granite Stone; A Luxurious and Durable Choice

Nehbandan granite is the hardest, strongest, and highest quality of building stones. This stone is extracted from the mines of South Khorasan Province, which is considered one of the best stones for use in buildings (interior and exterior spaces) due to its special characteristics.

Characteristics of Nehbandan Granite Stone
High durability: Nehbandan granite is very resistant to impact, pressure, and abrasion due to its high hardness and dense texture.
Attractive color scheme: This stone is often available in cream, gray, pink, and blue-gray colors, each of which has its own special beauty.
Waterproof: This characteristic can be used for humid spaces such as bathrooms and kitchens.
High durability in weather conditions: This stone is resistant to sunlight, rainfall, temperature changes, and rainfall, and is a good choice for the exterior of a building.
Long life: The high hardness of Nehbandan granite and the resistance of this stone are used for many years without losing quality.
What is the use of Nehbandan granite?
Paving and flooring: The high resistance of Nehbandan granite to pressure and abrasion makes it a good option for use in high-traffic environments such as sidewalks, passages and parking lots.
Exterior of the building: The long life and resistance to weather conditions have made Nehbandan granite an ideal choice for use in the exterior of the building.
Staircases and steps: Due to the high durability of Nehbandan granite, the use of this stone in high-traffic areas such as staircases of offices and commercial buildings is widely used.
Kitchen cabinets and countertops: Its beautiful appearance and water resistance have made this stone an ideal choice for use on kitchen cabinets and countertops.
Installation method of Nehbandan granite and important points during installation

Installation and implementation of Nehbandan granite requires precision and skill due to its high weight and high hardness. This stone is often used in exteriors, flooring, stairs, and kitchen countertops. Below, we will examine installation methods, implementation tips, and important recommendations.

Ways to install Nehbandan granite
1. Installation with cement mortar (traditional method)

This installation method is the most common granite installation method, usually used for floors, stairs, and interior walls.

First, the surface under the work is cleaned and leveled.

We use a mixture of cement, sand, and water to produce mortar.

We place the granite stone on the mortar and adjust it with a plastic hammer.

For greater durability, cement slurry is poured under and around the stone.

Note: Due to the heavy weight of Nehbandan granite, when using it on a wall, we must use a metal scoop to prevent the stone from breaking and separating.

2. Dry installation (modern and engineered method)

When implementing this method, Nehbandan granite stone is used without the use of mortar and using metal clips, screws and roll plates for installation on the facade. This solution is often used on the facade of high-rise apartments.

First, metal rails are installed on the wall.

Granite is attached to the rails using special clips.

The joints between the stones are filled with special glue or sealant.

Advantages of dry installation:

Greater resistance to earthquakes

Possibility of easy replacement of the stone in case of damage

Reduction of the dead weight of the building

3. Installation with stone glue

For interior walls, cabinet tops and spaces that do not require very high strength, special stone glue can be used.

First, the desired surface is cleaned and dried.
The glue is applied to the back of the stone and the wall surface and the stone is glued.
For better adhesion, contact with water is avoided for a few hours.

Note: This method is not recommended for wet spaces or exterior facades.

Installation steps for installing Nehbandan granite
To increase the consistency of the facade, it is necessary to use a metal scoop.
In cold areas, do not use too much water in the grout behind the stone (to prevent freezing).
To make the color of the stones uniform, arrange them side by side.
Standard slope should be applied to the stairs and floors (to prevent water from accumulating).

Final words:

Due to its unique characteristics, Nehbandan granite is one of the best and most durable stone choices for use in construction projects. If you are looking for a beautiful, durable and resistant stone to environmental conditions, Nehbandan granite is an ideal choice.

For consultation, contact us at 09122628437 or on social networks on the site.